Stems

Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt

A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)

Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.

- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem - Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm

3D-forged and CNC-machined AL6061/T6 mountain bike stem. - 4-bolt cold-forged alloy faceplate - Chromoly hardware - 40mm fork clamp stack height

- Giant's advanced alloy manufacturing process for a 35mm clamp diameter with maximized strength at minimal weight. - Not OD2, regular 1-1/8".

Precision 3D-Net shaped forged shaft interconnects with a precision broached clamp to create a strong, light, and secure stem offering +/-55 degrees range of adjustment. - Adjustable from +40 to -32 degrees - Stainless bar and stem clamp bolts

Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.

Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos

The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs. - Updated distinctive Zipp cosmetics - Carbon Exogram construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated computer mount available separately

FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)

The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)

Featuring purpose-engineered shaping, Giant’s all-new aluminum Contact SL stem is stiff, strong and ultra-light. Available in 0° and ±10°angles and eight lengths from 70 to 140mm brings superior performance to a wide range of riders. VERSATILE FIT Available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±0°/ ±10°), the Contact SL stem is perfect for any ride experience. - Super stiff, ultra-light aluminum - Compatible with all Giant OD1 and OD2 steer tubes - Integrated silhouette from stem to cone spacers - Compatible with Giant's Contact SLR/SL computer mount

ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).

The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm

- Lightweight, 3D forged, 2014 aluminum alloy - Proprietary Stealth recessed cable routing system enhances aerodynamic performance - Oversize box-section increases torsional stiffness with tuned vertical compliance

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 25D Stem offers 25-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged and internally machined 2014 alloy body - CrMo faceplate bolts and patented 220 degree bar clamp design reduces weight, increases stiffness and distributes stress more evenly - Stainless steel steer tube bolts and curved clamp slot reduces weight and steer tube stress - 5Nm torque max on all hardware - Fits most road and mountain bars - Installs without the removal of levers - Angle: 25-degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 40mm - Blatte finish - 120g (90mm)

The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)

When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.

The new ShockStop PRO Stem blends seamlessly with the aesthetic of modern bikes, while reducing fatigue and strain. Along with the ShockStop Suspension Seatpost, this system works together to suspend the rider and smooth out rough terrain on the bike you already own, making your ride smoother, faster, and more comfortable. Benefits: - Go further—reduce fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control over rough terrain - GPS and Utility Mounts sold separately Details: - Titanium Hardware - 15% Reduction in Weight over standard ShockStop - Refined premium finish - The ShockStop Stem in available in +/-6 degree angle with 80mm, 90mm, 100mm, 110mm, and 120mm lengths - Effective suspension travel: up to 20mm - Includes 5 swappable elastomers to fine tune your riding style - Check technical specs for compatibility What's in the Box: - 1 x ShockStop PRO Stem - 5 x swappable elastomers (2 pre-installed, 3 additional in box) - All required hardware

MSW 25° stems raise the bar—literally—for what riders can expect from an unassuming stem. Available in lengths from 60-110mm for custom fitting. Rigorously tested to ISO-4210 Mountain qualification standards. - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation - Bead blasted & anodized black finish

Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged front clamp diameter - Chromoly hardware

Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately