- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.
The new Transfer v2 models can each be expanded to carry an additional bike with the 1-Bike Add-On. Increase the capacity of your 1-Bike, 2-Bike, or 3-Bike rack to carry up to 4 bikes* with all the features you expect at a price that's unexpected. *Add-Ons cannot be stacked. Only a single 1-Bike Add-On can be attached to Transfer v2 models. The 1.25"-2" Transfer v2 2-bike (SKU T202B) model cannot take a one-bike add-on. - Automotive-grade 750 hour salt spray hardware - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
The EXO SwingBase takes your standard hitch and turns it into the ultimate foundation for hauling and organizing every piece of gear in your kit. It's the base to which all other EXO components attach. Simply leave it on your vehicle and change EXO components as your adventures adapt. - Swings away from the car with gear loaded to provide easy access to rear of the vehicle - Accessories install in seconds using the tool-Free EXO Cleat system and locking SpeedKnobs - Accessory arms fold in when not in use - Fits 2" hitch receivers only - Included HitchLock locks EXO SwingBase to vehicle - Includes 2 extra SKS locks cores for use with EXO accessories - Built-in bottle opener—cheers! - Limited Lifetime Warranty Product Specs: - Weight: 68.50 lbs. - Dimensions: L 34.00 in x W 49.00 in x H 9.50 in - Limited Lifetime Warranty
Double your hitch capacity with a second tier of super-accessible storage with the EXO TopShelf. Whether you're cycling and camping, skiing and hiking or simply needing to double your load, the EXO TopShelf can mix-and-match EXO accessories to make any adventure easier. - Attaches to EXO SwingBase to create a second level on your EXO Hitch system - Rotates 180 Degrees relative to EXO SwingBase for easy access to gear on lower level or to set-up base camp mode - Accessories install in seconds using the tool-Free EXO Cleat system with locking SpeedKnobs - Included HitchLock locks EXO TopShelf to EXO SwingBase - Includes 2 extra SKS locks cores for use with EXO accessories - Includes a jack stand for base camp mode set-up - Quick and easy install and removal - Limited Lifetime Warranty - Requires EXO SwingBase Product Specs: - Weight: 33.50 lbs. - Dimensions: L 31.00 in x W 25.00 in x H 26.60 in - Limited Lifetime Warranty
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 4 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Compatible with the sold separately BackSwing - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 65.00 lbs - Dimensions: L 22.00in x W 46.00in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required
Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks. - New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs - Sleek, low-profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 18.00 lbs. - Dimensions: L 56.00 in x W 9.50 in x H 4.50 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24inches or more
Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System. - Comes with 2 Crossbars and 4 Endcaps - Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss internal support engineering adds serious strength for minimal weight - T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow - Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof - Streamline crossbars are compatible with any StreamLine Tower - Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams - Find the right bar style and length to fit your needs - Compare four crossbar styles and features to learn more
$68.00 - $136.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Here's a hitch rack that goes long on features. Starring the UpperHand control lever that tilts the rack to make access to your vehicle a cinch. Also includes zero-hassle ZipStrips to secure your bike, folds flat for easy storage and to top it off is fully assembled out of the box. - No garage required. Comes fully assembled with no bits and pieces. - New UpperHand lever tilts rack down for vehicle access and folds it flat for storage. - New ZipStrips secure bikes to the rack and are fully removable. - Tool-free SpeedKnob quickly tightens and lock the rack to your car. - Anti-sway cradles eliminate bike-to-bike contact. - Enjoy a cold one with the Yakima signature bottle opener. - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Fits 1.25" and 2" hitch receiver. - Carries up to 4 bikes. Also available in a 2 or 5 bike capacity. - Lock your bikes to the rack with the HandCuff locking cable (sold separately). Product Specs: - Weight: 35.00 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”
The SweetRoll makes loading your boat as easy as it's gonna get! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. No tools needed to mount to any bar type makes it simple to install. And the spring-loaded base automatically adjusts to boat when loading. - Complete system that includes rear saddles with integrated rollers for easy loading for 1 boat - Fully assembled out of the box - Tool-free installation - Fits Yakima round, square, factory and aerodynamic bars - Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Heavy-Duty Straps and Bow and Stern Tie-Downs included (HoodAnchor, sold separately, is required for vehicles with no attachment points for Bow and Stern Tie-Downs) - SKS Locks sold separately - Supports one boat up to 80 lbs - Minimum crossbar spreads of 24" or more Product Specs: - Weight: 7.71 lbs. - Dimensions: L 12.00 in x W 11.00 in x H 11.00 in - Minimum Crossbar Spread 24.00in - Limited Lifetime Warranty
Extend your capacity–the TimberLine attaches to factory racks with raised side rails to expand your carrying capacity and deliver maximum rooftop versatility. Secure and super-sleek, they are quiet, simple to install and work with all of Yakima's bars. - Complete set of TimberLine Towers - The totally new Yakima tower for vehicles with raised side rails. - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Strong, durable stainless steel strap to accommodates a range of rails - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with Yakima's SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower TECHNICAL SPECS - Weight: 5.00 lbs - Dimensions: L 6.00” x W 3.50” x H 3.00”
Transport 2 bikes regardless of frame design, suspension or wheel size. Perfect for fat bikes, bikes with fenders and women's-specific bikes. - Transport two bikes regardless of frame design, suspension, or wheel size - Ideal for fat bikes, kids' bikes and fenders (FatStraps—sold separately—are necessary for carrying fat bikes) - Secures bike by the frame with padded arms - Fits 1-1/4" or a 2" hitch receiver right out of the box - Low tray height for quick and easy loading and unloading of bikes - Folds down with bikes loaded for rear-of-vehicle access - Folds up when not in use - Accommodates bike wheelbases up to 48" - Maximum bike weight 45lbs/20.5 kg (Total maximum load 90lbs) Product Specs: - Weight: 39.00 lbs. - Dimensions: L 50.00 in x W 24.00 in x H 18.00 in - Limited Lifetime Warranty
Page 1 of 4 Next page