Filter By:
Cables

$15.00
Cables are coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Length: 2350mm
- Diameter: 1.6mm
- Double Ended: No

$12.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

$21.99 - $25.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

$9.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

$24.99 - $29.99
Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. The cable surface is highly polished to remove friction causing imperfections on the cable surface. These cables are a great fit for bikes with full cable housing and modern drivetrains.
- Diameter: 1.1mm
- Double-ended: No
- Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses
- Compatible with all performance housing and lubricants
- Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance
- Stainless steel wires are corrosion resistant

$29.99 - $59.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

$11.99 - $15.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification

$11.99 - $15.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance.
Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance.
- Polished stainless steel construction for low friction
- Compatible with all performance housing and lubricants
- Cables are tinted gold for easy identification

$13.99 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

$4.99 - $10.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

$8.99
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

$5.99
- Vision Aero/reverse brake lever specific brake cable
- Replacement cables that only work with Vision reverse brake levers
- Sold individually

$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$27.00
Shimano Stainless Road/MTB Brake Cable & Housing Sets
- 1 x 2000mm black 5mm housing
- 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables
- 2 end caps and 2 cable crimps

$38.00
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1

$89.90 - $99.90
- Brake casing has internal lining and external plastic coating
- Derailleur casing is compressionless with internal lining and external plastic coating

$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

$45.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
- Compatible with SRAM Guide R, RS, RSC, and DB5 brakes
- Length: 2000mm

$18.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

$18.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

$45.00
Replacement line kit for SRAM and Avid hydraulic disc brakes.
- For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1)
- 2000mm, black

$70.00
Includes:
- 1.1mm elite cables (2 x 2300mm)
- 4mm reinforced linear strand housing
- Ferrules, end caps, frame protectors
Page 1 of 5
Next page