Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

Vittoria Pit Stop Tire Sealant
$10.99 - $11.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Topeak JoeBlow Sprint Floor Pump
Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!
Problem Solvers Air-Bob Replacement Head
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
Portland Design Works Ninja Pump
$34.00
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty
Portland Design Works Shiny Object CO2 Inflator w/cartridge
$26.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. It includes a control knob to keep you in charge of the pressure and a threaded Co2 cartridge with a neat leather sleeve. And, it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)  - Leather sleeve length: 55 mm (2.25") - Weight of inflator with cartridge: 80 g (3 oz)
Planet Bike 12g CO2 Replacement Cartridges - Threaded
$8.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2 - Unable to ship to Canada
Planet Bike 16g CO2 Replacement Cartridges - Threaded
$9.99 - $224.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.
Lezyne Caddy Sack CO2
Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.
Lezyne Trigger Drive CO2
$17.99 - $19.99
CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves
Giant Control Tower 2
LESS IS MORE. The Giant Control Tower 2 is a great pump choice. A durable structure provides stability during use, remove the surplus function provides better efficiency with fewer strokes to fill your tires. The proven AutoHead is compatible with most common tire valves and the large 3-inch gauge makes it easy to read up to 180psi. - Easy-to-read 3.0" base mounted analog gauge - Comfortable handle with solid steel barrel design - AutoHead design - 180psi rating
Genuine Innovations CO2 Refill Cartridges (20-pack)
$59.99 - $73.99
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
Buzzy's Pollinator Travel Shock Pump
Buzzy's Pollinator Travel Shock pump's compact size and removable 300 psi gauge make it is the perfect choice for mechanics on the go.
Blackburn Core CO2'Fer Mini-Pump
Combine the best elements of all of Blackburn's mini-pumps and what do you get? The Core CO2'Fer Pump. The Core CO2'Fer is an excellent stand-alone mini-pump that adds the versatility of an integrated CO2 inflator and the peace of mind of a Presta valve tool, ensuring nothing goes wrong when all you need is an inflated tire. A remote inflation hose takes unwanted stress off the tire valve. - Removable CO2 inflator - 120 PSI - Thread-on Presta/Schrader - Retractable hose - Removable Presta valve core tool - Includes 16g cartridge, frame mount, CO2 strap
XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
TwoFish Twofish Bikeblock Inflator Holder
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak Airbooster G2 CO2 Inflator
$44.95
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak Pressure-Rite
$14.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Topeak Pressure-Rite Schrader Valve Adapter
$19.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Topeak Presta Valve Extender
$6.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak Road DA G
$34.95
The most compact, lightweight Dual Action pump with gauge that road riders can fit anywhere. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires to 120psi / 8bar. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta with integrated dust cap - Barrel/Thumb Lock: Aluminum - Handle: Polymer - Capacity: 120psi / 8bar, 1-1/8” Analog - Volume Per Stroke: 36 cc (pull + push) - Added Features: Dual action pumping head - Side mount bracket - Size: 21.8 x 3.4 x 3.1cm / 8.6” x 1.3” x 1.2” - Weight: 116g / 4.09oz
Topeak SmartHead ThreadLock Upgrade Kit
$17.95
Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.
Topeak Turbo Morph Digital
$74.95
Advancing the award-winning Morph with high tech—introducing the Turbo Morph Digital. Top-mounted flip-down digital gauge makes reading pressure easy and provides accurate tire pressure up to 160 psi / 11 bar. The fold-out foot peg and flexible hose provides excellent stability for more efficient pumping. Specs - HEAD: Presta / Schrader / Dunlop valves - BARREL: Butted aluminum - GAUGE: Flip-down digital, 160 psi / 11 bar - BATTERY: CR2032 x 1 (included) - VOLUME PER STROKE: 103.2 cc - THUMB LOCK: Plastic - HANDLE: T-type dual density polymer - SIZE: 35 x 7 x 4.3 cm / 13.8” x 2.8” x 1.7” - WEIGHT: 320 g / 11.29 oz Added Features - Fold-out foot peg - Flexible hose - Centerline mount bracket
Silca Hiro Side-Lever Locking Disc Chuck
$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
Silca Thread-on Schrader Chuck
$12.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
SKS Air X-Press 8.0
$34.99
Now 50mm higher than before, the Air X-Press 8.0 is an upgrade of our sturdy and lightweight plastic floor pump with an accurate gauge for precise pressure control. - Displays both bar and PSI - Convenient handling due to proven SKS MULTI VALVE pump head with thumb lock lever - Inflates easily up to 8 bar/115 PSI
SKS AirKompressor 12.0 Floor Pump
$54.99
SKS's AirKompressor 12.0 Floor Pump can handle it all. The E.V.A. head works with all valves and the 174 psi/12 bar max pressure lets you fill up even the highest quality road tubulars. Fat mountain tires are also easy to air up, too, thanks to the high-volume, extra-long steel body. And, an oversize gauge and long hose make the AirKompressor perfect for every job.
SKS Airbuster CO2 Inflator
$27.99
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
SKS Airflex Explorer Mini Pump
$44.99
Airflex Explorer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for MTB or urban bikes. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 5 bar/73 psi - Compatible with Presta, Schrader, and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 205mm - Weight: 132 grams - Made in Germany
SKS Airflex Racer Mini Pump
$44.99
Airflex Racer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the Presta valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for high-pressure tires. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 8 bar/115 psi - Compatible with Presta and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 196mm - Weight: 105 grams - Made in Germany
Page 1 of 6 Next page